Waterproof mastic - ICOPAL
- category: Coating waterproofing / მასტიკა
- Brands: ICOPAL
Waterproof mastic Icopal consists of high quality petroleum bitumen and organic solvents, mineral extenders and plasticizers. The product... See more
Waterproof mastic Icopal consists of high quality petroleum bitumen and organic solvents, mineral extenders and plasticizers. The product is ready for use.
See less
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Average flow rate per layer, kg/m2 |
1,65 |
|
Drying time at +20°С, hr, not more |
24 |
|
Dry residue melting point, °С, not less |
80 |
|
non-volatile matter content, %, not less |
50 |
|
concrete bond strength, MPa, not less |
0,1 |
|
Water absorption rate during 24 hours, by weight, %, not above |
2 |
|
Radius of curvature with radius at bent 5 mm ± 0.2 at the temperature of -5°С, not above |
In compliance |
|
Waterproofing under a pressure of 0.03 MPa during ten minutes |
No signs of water leak |
High water penetration resistance and low flow rate.
application area:
Arrangement of insulating waterproofing of underground and embedded structures, indoor premises of buildings, enclosed balconies and verandas, protection of metal structures from corrosion, application of rolled bitumen materials.
application method:
- Mastic is applied with a putty knife, a paint roller or a mop at the ambient temperature that varies from -5°С to +45°С. At the temperature that is lower than +5ºС, mastic should be conditioned in a warm space for 24 hours at the temperature of no lower than +15ºС.
- Before use, the whole volume of mastic should be thoroughly mixed. If necessary, it can be diluted with white spirit, kerosene oil or solvent petroleum spirit.
- The working surface should be dry, pre-cleaned from dust, dirt, snow and ice.
- It is important to wear gloves when working with mastic. Contact of the materials with eyes and skin is to be avoided.
Products offered
WEBER DRY SS 10 SIVI 10 KG (ჰიდროიზოლაციის სითხე)
- category: Coating waterproofing
- Brands: WEBER
ICOPER MULTIUSO 5KG ROSSO- უნივერსალური პოლეურეთანის მემბრანა
- category: Coating waterproofing
- Brands: ICOBIT
ICOPOX 4 - 20 Kg (A+B) - two-component, colored, self-leveling polyurethane coating.
- category: Coating waterproofing
- Brands: ICOBIT
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 500, delivery is free (Tbilisi, Kutaisi, Batumi, Rustavi, Mtskheta); Promotion and free delivery service for purchases over 300₾ are valid at this stage.
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 2-3 working days
- Out of town::
Delivery time: 3-4 days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Waterproof mastic - ICOPAL
choose a product
- WEBER DRY BITUM 1K 20KG
- Primer bituminous (Primer) Profimast (5 l / 4.5 kg)
- Waterproofing mastic Profimast (5 l / 4.5 kg)
- WEBER DRY SS 10 SIVI 10 KG (ჰიდროიზოლაციის სითხე)
- ICOPER MULTIUSO 5KG ROSSO- უნივერსალური პოლეურეთანის მემბრანა
- CasaComfort -2.5-14l.
- WEBER DRY 706 32
- ICOPER HP 20KG liquid fibrous membrane
- Waterproofing mastic Profimast (21.5 l/18 kg)
- Waterproofing mastic Profimast (21,5 l / 18 kg)
- ICODIL SX - universal solvent
- WEBER DRY SS-10 LIQUID 10KG
- WEBER DRY RAPID STOP
- WEBER DRY SS-7 EASY LIQUID 6KG
- ICOPOX 4 - 20 Kg (A+B) - two-component, colored, self-leveling polyurethane coating.
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Average flow rate per layer, kg/m2 |
1,65 |
|
Drying time at +20°С, hr, not more |
24 |
|
Dry residue melting point, °С, not less |
80 |
|
non-volatile matter content, %, not less |
50 |
|
concrete bond strength, MPa, not less |
0,1 |
|
Water absorption rate during 24 hours, by weight, %, not above |
2 |
|
Radius of curvature with radius at bent 5 mm ± 0.2 at the temperature of -5°С, not above |
In compliance |
|
Waterproofing under a pressure of 0.03 MPa during ten minutes |
No signs of water leak |